Thermo Scientific AFC-3000 Скачать руководство пользователя страница 41

Страница: 41 / 88

UltiMate 3000 Series:

AFC-3000 Automated Fraction Collector

Operating Instructions

Page

3.4 Connecting the Fraction Collector

The next steps in the installation process involve connecting the AFC-3000 to the power

source and to the Chromeleon computer. The following sections explain how to establish

these connections.

3.4.1 Connecting the External Desktop Power Supply

A voltage-specific external desktop power supply is delivered with each AFC-3000.

Use the external desktop power supply shipped with the fraction collector to connect the

instrument to the main power source:

Place the AFC-3000 within 1.2 meters of a power outlet.

Connect the external desktop power supply to the DC power input connector on the

rear panel of the fraction collector (

→

Fig. 3, page 19).

Connect the supply side of the power supply to the power source that is connected to a

true ground.

The input rating is AC 100V-240V 1.9 A with an output of DC 24V, maximum 3.33 A. No

manual adjustment is required to adapt the line voltage to local voltage requirements.

Warning:

Never use a power cord other than the power cords provided for the

device.
Do not use multiple sockets or extension cords. Using defective

multiple sockets or extension cords may cause personal injury or

damage to the device.

Avertissement:

Utilisez uniquement les cordons d’alimentation électrique spécifique

à l’instrument.

N'utilisez pas des blocs multiprise ou des câbles prolongateurs. Cela

pourrait entraîner des blessures corporelles ou endommager

l'instrument.

Important:

The AFC-3000 is intended to operate from an AC power source that

will not apply more than 240V AC between the supply conductors

and ground. A protective ground connection by way of the

grounding connector in the power cord is required for safe operation.

Important:

L'AFC-3000 est destiné à fonctionner d'une source d'alimentation

courant alternatif qui s'appliquera pas plus que 240V courant

alternatif entre le conducteur et la terre. Une connexion de protection

à la terre par le fil neutre dans le fil d'alimentation est nécessaire

pour la sécurité d'exploitation.

Содержание AFC-3000

























































































Результаты поиска

Содержание AFC-3000

Отзывы:

Похожие инструкции для AFC-3000

Бренды по названию

Популярные бренды

Thermo Scientific AFC-3000, Руководство по эксплуатации

Результаты поиска

Содержание AFC-3000

Отзывы:

Похожие инструкции для AFC-3000

Бренды по названию

Популярные бренды