Section 3 Overview
3.1 Specifications
Speed Range......................................................150 to 1200rpm
Orbit Diameter.................................................................
￠
2.5mm
Speed Accuracy......................±1% of set speed up to 299rpm
±
2%
300 to 1200rpm
Maximum Load……………………………………...........1kg @1200rpm/
4kg @
≤
400rpm(accessory included)
Maximum Capacity(Centered on tray)……96-well Microplate
4 or 6 depends on different platforms
Timing Range…………..……............................0, 1min. 99h59min.
Overall Dimensions........................................383×260×145mm
Tray Dimensions...............................................275×235×14mm
Packaging Dimensions.................................487×387×264mm
Net Weight.............................................................12.8Kg(28.2lb)
Gross Weight............................................................15Kg(33.1lb)
Requirement................................AC100-240V, 50/60Hz, 72VA
Certification..............................RoHS, WEEE, cCSAus, CE Mark
Application Environmental Conditions: indoor use
Temperature....................................................................5 to 40
℃
Altitude...........................................................................
≤
2,000 m
Humidity...................................................................... 20% to 85%
Storage Environmental Conditions
Temperature....................................................................0 to 60
℃
Altitude...........................................................................
≤
2,000 m
Humidity.......................................20% to 90%, non-condensing
~
3.2 Environmental Conditions
3.3 Safety Instructions
Rotation Speed
Load
Time
Size
Weight
Power Supply
Others
Please read the entire instruction manual
before operating the Digital Microplate
Shaker.
Digital
Mircopalte Shaker
DO NOT
immerse the unit for
cleaning.
DO NOT
operate the unit if it shows
WARNING DO NOT
use the
in a hazardous
atmosphere or with hazardous
materials for which the unit was
not designed. Also, the user
should be aware that the
protection provided by the
equipment may be impaired if
accessories used are no provided
or recommended by the
manufacturer, or are used in a
manner not specified by the
manufacturer.
CAUTION !
To avoid electrical
shock, completely cut off power to
the unit by disconnecting the
power cord from the unit or unplug
from the wall outlet. Disconnect
unit from the power supply prior to
maintenance and service. Any
spills should be removed promptly.
Bio hazard spills should be cleaned
using approved liquid promptly.
Solvent spills are a fire hazard.
Stop the unit immediately, and DO
NOT operate until clean up is
complete and vapors have
dissipated.
signs of electrical or mechanical
damage.
Position of Loads
Please place loads symmetrically during
operation.
Symmetrical placement
5
|
Section 3 Overview
Digital Microplate Shaker 6
