3.4 Loads, Angle and Speed
Asymmetric loading or unloading
may affect the normal operation of
the instrument and may even cause
unpredictable damage.
This
is applicable to
various mixing operations in different
areas, including gel colorization/
decolorization, sample cleaning,
antibody staining, hybridization,
immunoprecipitation, blot, and small
volume tissue culture. To avoid accident
during operation, please use rubber
bands to fasten containers onto the tray.
Digital Rocker
Section 4 Operation
Time
Tilt
Run
Run
Stop
Speed
Time/Tilt
rpm
Mode
①
②
③
④
⑤
⑥
This chapter covers the control panel and its operation.
4.1 Control Panel
⑧
⑦
⑨
①
②
③
④
. Run indicator: The light is on when
the instrument is running and off
when the instrument is in standby.
. Speed display window: The window
displays set speed (when the
instrument is in standby) or current
speed (when the instrument is
running).
. Time/Tilt display window: The
window displays cumulative time (in
continuous mode) or remaining time
(in timer mode). The range of time
displayed is 0s to 9999 minutes.
. Time indicator: The light is on when
the instrument is running in Timer
Mode.
. Tilt indicator: The light is on when
the instrument is in Tilt Adjustment
Mode.
. Mode button: Switch modes between
time and Tilt settings.
⑦
. Time/Tilt setting buttons: UP/DOWN
arrow buttons are used to increase/
decrease the set time/tilt angle of the
instrument.
. Speed setting buttons: UP/DOWN
arrow buttons are used to increase/
decrease the set speed of the
instrument.
. Run/Stop button: Start or stop the
instrument.
⑤
⑥
⑧
⑨
7
|
Section 3 Overview
Digital Rocker 8
Warning:
It may affect the maximum
speed of the instrument if placing the
cell culture flask in the corner or on
one side of the tray. If asymmetrical
placement is required by the experiment,
please make sure to increase the speed
gradually.
15°
Maximum
(rpm)
Speed
Placement
Tilt Angle
Maximum
(Kg)
Weight
Centered
Centered
70
70
3.0
3.0
15°
1°
1°
Centered
Centered
50
50
4.5
4.5
