Model 3050/3052 2-1
Thermo Scientific
Section 2
Installation and Start-Up
Connect a regulated gas supply to each of the two inlet fittings located on
the back of the unit. The fittings are labeled. Refer to Figure 2-1. A filter
(Stock No. 770001) is recommended to be installed on each of the inlet
connections. Check the connections for leaks.
The gas outlet is located between the inlet fittings. Refer to Figure 2-1.
Connect the supply tubing to the barbed outlet and connect the other end
to the incubator or other piece of equipment requiring a gas supply. Check
the gas outlet for a possible leak.
TANK 1
15 PSI
REGULATED
ALARM
CONTACTS
30V, 1A MAX.
TANK 2
15 PSI
REGULATED
OUTLET
VOLTAGE
SELECT
115V
Figure 2-1.
Rear View
Connect the Gas
Tanks
Connect the Gas
Outlet
