6
Unpacking and Installation
Shipping Carton
This should be inspected upon delivery. When received, carefully
examine for any shipping damage before unpacking. If damage is
discovered, the delivering carrier should both specify and sign for
the damage on your copy of the delivery receipt
.
Open the carton carefully making certain that all parts are
accounted for before packaging materials are discarded. After
unpacking, if damage is found, promptly report it to the carrier
and request a damage inspection promptly
.
IMPORTANT: Failure to request an inspection of damage within
a few days after receipt of shipment absolves the carrier from any
liability for damage. You must call for a damage inspection
promptly
.
Unpacking
Use the list below when unpacking to verify that the complete
unit has been received. Do not discard packing materials until all
is accounted for
.
The following items are included in the shipment:
Refrigerator/Freezer
Operation Manual
Location
Locate your unit in the most convenient place and near a
grounded electric outlet. Do not use an extension cord or adapter
plug. The cabinet should be level at the front and the rear. The
sides should be tilted 1/4th inch (6mm) from front-to-back to
ensure that doors close and seal properly. Doors should be
aligned with each other.
If possible, locate your unit out of direct sunlight and away from
heat sources such as a radiator or heat duct.
Clearance
Below clearances are needed for ease of installation, proper air
circulation and electrical connections:
Sides and Top : 3/8
th
inch
Back : 1 inch
