10. Reverse door handles (see Handle
Installation section).
11. Move freezer and refrigerator door stops to
opposite side. Before starting screws, use
an awl to puncture the foam.
INSTALLATION
12
.
Position refrigerator door onto bottom hinge
pin and screw center hinge pin through
center hinge into top of door. Close
refrigerator door to help align hinge hole.
13. Tighten center hinge pin with adjustable
wrench.
14
.
Remove cabinet and hinge hole plugs and
move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift
up on opposite side of door while
tightening screws to install top hinge.
17. There are two toe grille covers provided in
your literature packet; one for the right
side and one for the left side. Install the
appropriate cover over the opening on the
side opposite the anti-tip bracket, (see
Figures A & B).
Note
In case of future door reversals, save
the toe grille cover not being used.
18. Flip toe grille and reinstall (some models).
19. Plug in electrical power cord and turn
refrigerator temperature control to center
position. Adjust setting as necessary.
Warning
When reversing the door swing:
You MUST move the anti-tip bracket
to align with the hinges of the door
and install the toe grille support for
proper b
a
lance. Failure to do so will
result in injury.
OR
11
