Thermo Scientific 1160, Инструкция по эксплуатации

Страница: 25 / 52

Chapter 3 Operation
3-3
The jumper settings are as follows:
•
J1 30 days
•
J2 60 days
•
J3 90 days
•
J4 120 days
•
J5 150 days
•
None - alarm disabled
Mode Selection
Pump operation mode and pressure units displayed can be selected by changing jumper
positions on the display board. Table 3-1 below details the jumper position and function
of that position.
Table 3-1. Mode Selections
Jumper position Function
Pum
p
ON Pump is placed in continuous run mode.
AUTO
Pump is activated only when the catalytic reactor
temperature is above 90% of set point.
Pr
es
su
re
U
nits
PSI
Front panel displays pressure in units of
Pounds per Square Inch (PSI)
KPA
Front panel displays pressure in units of
Kilopascals (kPa)