7
Voice controlled models
Commissioning Switch:
Please put the commissioning switch in position “I” when you turning the heater on after the
completion of the plumbing works and Electrical connection.
Commissioning switch position “I” bypasses the Alexa Wi-Fi module inside the heater allows to
test the heater function.
Checks prior to powering up or using the heater
Your smart phone or tablet is connected to a 2.4G Wifi with internet (Note some new Routers
will need to be adjusted from the default 5.0G mode)
You have the correct WiFi Password ( Very Important )
Your smart phone or tablet must have access to App store or Google Play
Your Router is MAC
– Open
Set up Guide for controlling Via the E We Link app
1.
Start with getting the “eWeLink” App , You may Scan the QR Code on the Heater lid Label or
search in the App Store or Google Play for Android
2. Register an eWeLink account
3. Log in to Your account
4. Power up the Plinth Heater
5. Blue light (see the photo below for the location) should be flashing 3 times than 1 sec off
repeatedly.
6. Tap + on eWeLink app
7.
Select “Quick Pairing Mode”
8. Add one device (multiple device if you want to pair 2 heaters )
9. Input your WiFi Password (Ensure correct and no special characters $& # )
10.
Name the device “Plinth Heater” after it connected.
11. When the Device is connected the blue LED will be permanently on.
