Thermics LUNA 2T, Инструкция по установке, техническому обслуживанию и ремонту

Страница: 5 / 40

5
LUNA 2T | INTRODUCTION
1 Introduction
1.1 Purpose of the manual
The purpose of this manual is to provide the customer with all the information necessary to use and
operate the machine correctly, independently and safely.
The manual contains information on the safety, technical aspects, operation, maintenance and transport
of the following machines:
LUNA 2T - Reversible heat pump with inverter technology
Correct use and maintenance contribute to good operation and a longer life cycle of the machine.
For any doubt or further information, please contact your nearest service centre or the manufacturer's
after-sales service directly.
1.1.1 Storage
The manual must be kept with care and in the immediate vicinity of the machine, far from liquids and
anything else that could compromise its readability, and must be available for consultation at any time.
The manual and the Declaration of Conformity are an integral part of the machine and must therefore
accompany it throughout its entire life cycle.
Parts of this documents must not be removed, torn or arbitrarily modified.
If the manual is lost or illegible, request a copy to the Manufacturer.
1.1.2 Updating the manual
The information, descriptions and illustrations contained in this manual reflect the state of the art at the
time the machine was placed on the market.
The Manufacturer, in its constant commitment to improve its products and/or for market reasons,
reserves the right to make, at any time, modifications to the machines for technical or commercial
reasons without prior notice and without legitimising the Purchaser to terminate the contract.
In the event that, due to modifications to the machine installed at the Customer's facility, it is necessary
to integrate, modify and/or update the contents of this manual, the Manufacturer shall provide the
updated and revised chapters.
It is the responsibility of the user, following the instructions accompanying the updated documentation,
to replace all copies held with the updated ones.