Clean the strainer as follows:
1. Switch off the heat pump.
2. Turn the stopcock to the closed position (see figure above).
3. Unscrew the cover and remove it.
4. Remove the strainer.
5. Rinse the strainer.
6. Reinstall the strainer.
7. Check that the o-ring on the cover is not damaged.
8. Screw the cover back into place.
9. Turn the stopcock to the open position.
10. Start the heat pump.
User Guide
iTec Eco
AWIE01UG102
Thermia AB
24
Содержание iTec Eco
Страница 1: ...User Guide iTec Eco www thermia com ...
Страница 29: ...User Guide iTec Eco Thermia AB AWIE01UG102 29 ...
Страница 30: ...User Guide iTec Eco AWIE01UG102 Thermia AB 30 ...
Страница 31: ...User Guide iTec Eco Thermia AB AWIE01UG102 31 ...
