![THERMEx Vertical 845 Скачать руководство пользователя страница 55](http://html1.mh-extra.com/html/thermex/vertical-845/vertical-845_manual_1104031055.webp)
7
1. Press
button once; lights will be turn on . Press
button again to turn off
the lights.
2. Power on: After you have connected the cooker hood to the mains supply, you can
start using the cooker hood by selecting the motor fan speed that you want,
(Low),
(Medium),
(High)
3. Press the
(Low) button, the indicating light
will beam, and the motor runs
at low speed. Press it again and the motor will stop.
4. Press the
(Medium) button, the indicating light
will beam, and the motor
runs at mid speed. Press it again and the motor will stop
5. Press the
(High) button, the indicating light
will beam, and motor runs on
high speed. Press it again and the motor will stop.
6. While the cooker hood is in use and by pressing the delay button
once, the
cooker hood will run for 5 minutes and then turn off automatically.
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but motor
does not work
Fan switch turned off
Select a fan switch position.
Fan switch failed
Contact service center.
Motor failed
Contact service center.
Light does not
work, motor does
not work
House fuses blown
Reset/Replace fuses.
Power cord loose or
disconnected
Refit cord to power outlet.
Switch power outlet on.
Oil leakage
One way valve and the outlet
are not tightly sealed
Take down the one way valve
and seal with sealant.
Leakage from the connection of
chimney and cover
Take chimney down and seal.
Lights not working
Broken/Faulty globes
Replace globes as per this
instruction.
Insufficient suction
The distance between the
range hood and the gas top is
too far
Refit the range hood to the
correct distance.
The Range hood
inclines
The fixing screw not tight
enough
Tighten the hanging screw and
make it horizontal.
Содержание Vertical 845
Страница 1: ...Vertical 845 Dansk PSTL 4WFOTLB Espa ol English...
Страница 59: ......