![THERMEx S-DD4 Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/thermex/s-dd4/s-dd4_instruction-manual_1104008050.webp)
S-DD4
50
SDD4 MODEL STAINLESS STEEL
AND GLASS VERSION (Fig. 17)
A:
Light ON/OFF key
GLASS Version :
Lighting turns on and off independently from
the extractable unit position.
STAINLESS STEEL Version:
Lighting turns on and off only with the extract-
able unit open.
By pushing this key with the extractable unit
closed, the extractable unit will open and then
the lighting will turn on.
B:
ON/OFF key
With the appliance turned off:
The key starts the suctioning panel extraction
and, when it is fully open, activates the 2nd
speed of the motor.
With the suctioning panel open:
The key turns the motor off, turns the light-
ing off, if on, and draws back the suctioning
panel.
C:
(-) Key
It reduces the motor speed from the 4th
speed to complete turn off, without closing
the extractable unit.
D:
Indicators
•
It shows the speed set by turning on only the
related led.
•
It signals the filters saturation by turning on
all leds.
•
It shows the calibration reset by flashing all
of the leds.
E:
(+) Key
It increases the motor speed from the 1st to
the 4th one, without moving the suctioning
panel.
F:
Timer
After 10 minutes from its setup, it allows to
stop the motor , close the extractable unit and
turn the lights off, if on.
This function is active when signaled by the
flashing of the “
D
” led related to the speed
setup.
Push the key again to annul this function.
Other functions:
Automatic turn off:
After 4 hours of continuous working from the
last setup, the appliance turns off and closes
automatically.
Grease filters saturation:
After 30 hours of working, the speed indica-
tors “
D
” will all flash simultaneously, signaling
the grease filters saturation.
To reset this alarm, push the “
TIMER
” key
when the downdraft is completely off and the
extractable unit is closed.
Calibration:
The cooker-hood carries out its self-calibra-
tion every 3 complete cycles of its extractable
unit.
By pushing the “
TIMER
” key 6 times consec-
utively (MAX break between one push and the
other is 3 sec.) all the leds will flash and the
calibration will be reset.
After the next 3 cycles the downdraft will carry
out its self-calibration.
HOW
THE HOOD WORKS
Содержание S-DD4
