THERMEx ID 100 V, Руководство пользователя

Страница: 9 / 102

7
10. OPERATION
Figure 2. Electronic control board
Figure 2 : 1 – LCD display, 2 – button «▲» Temperature control / increasing the
heating temperature, 3 – button «▼» Temperature control / decreasing the heating tem-
perature, 4 – button «on/off» / switch on/switch off, 5 – button «Heating mode» / setting
the heating power, 6 – “No Frost” mode indication, 7 – indication «Economy» / mini-
mum power, 8 – indication «Optimal» / conventional power, 9 – indication «Turbo» /
maximum power, 10 – Wi-Fi feature.
Switching on/switching off of the EWH is performed by pressing the central button
«on/off» (Figure 2, p. 4), while the display shows the preselected heating temperature.
After 2.5 seconds, the display shows the current water temperature in the EWH. Selec-
tion of the heating power is performed by pressing the button «Heating mode» (Figure
2, p. 5), on the control panel. Mode 2 kW is accompanied by the indication of a control
lamp «Turbo» (Figure 2, p. 9), 1,3 kW is accompanied by the indication of a control
lamp «Optimal» (Figure 2, p. 8), and 0,7 kW is accompanied by the indication of a
control lamp «Economy» (Figure 2, p. 7). Antifreeze mode is accompanied by the indi-
cation of a control lamp «No Frost» (Figure 2, p.6).
During the operation of the EWH, the user can adjust the temperature of the water
heating using two buttons «▲» «▼» Temperature control (Figure 2, p. 2 and p. 3).
If you do not use the EWH in the winter time and there is a possibility of freezing
of the main waterways and the water heater itself, it is recommended to turn off the
power and drain the water from the EWH in order to avoid damage to the inner tank.
ы
EN