THERMEx FJERNBETJENING, Инструкция по эксплуатации

Страница: 30 / 36

THERMEX
B R520192152007012020
30
EN
GL
SIH
»
REMO
TE C
ONTR
OL
REMOTE CONTROL
1. LED
2. On/off light
3. (+) button
4. (-) button
5. On/off extraction
The remote control uses a radio frequency system that enables the hood's functions to be
controlled up to a distance of 8 metres (this distance can be reduced if the signal is disrupted
by a wall and/or furniture, or if the batteries are almost dead).
When a button is activated on the remote control, the LED will light on the remote control.
When using the remote control for the first time, the accompanying battery must be inserted
first:
•
Remove the protective film that surrounds the battery.
• Remove the battery cover on the bottom of the remote control by loosening the small
clip.
• Insert the battery. NOTE: take care to position the battery correctly.
• Replace the battery cover on the remote control.
• The remote control is now ready for use.
As a radio frequency system is used between the remote control and the hood, the two units
must be coupled up to each other. The manufacturer has already coupled the hood up to the re-
mote control when you receive it. The connection between the two units can however be lost,
and must subsequently be coupled back together again.
1
2
5
4
3