THERMEX
ASTON
M 527230061212112015
72
INSTALLING THE DUCT FOR OPEN-AIR VENTING
If the hood is going to be installed with exhaust venting into the open air, the duct is installed
as follows:
ENG
LISH
»
IN
STA
LL
AT
IO
N
Measure the placement of the bracket
and mark the position of the holes on the
wall.
NOTE: The bracket must be positioned so
that it matches the holes in the duct.
Pre-drill the holes and insert the
rawlplugs.
Screw the bracket onto the wall.
1
2
x2
x2
x2
Install the exhaust outlet on the hood.
3
4