Range of Motion (ROM) Knee Brace
with Advanced Heat or Cool Therapy
1
• Lift the handle.
• Gently peel back black rubber fill cap.
• Slowly pour DISTILLED WATER into the reservoir under
the fill cap (water should drain through hole in the center of
the reservoir).
• Ensure you have filled between “MIN” and “MAX” levels on
the water level indicator to maintain optimal performance.
FILL THE RESERVOIR WITH
DISTILLED WATER
DISTILLED WATER RESERVOIR
HANDLE (
RAISED)
CONNECTOR PORTS
AC/DC ADAPTER PLUG
MAX
MI N
INSTALL
A BRACE
2
· Remove the white
caps from the
end of the white
connectors on the
tubing assembly.
• Insert the
connector
on the brace
into the port
on the tubing
assembly until
you feel the
connector click
and lock into
place.
4
! BE SURE WATER LEVEL IS
BETWEEN MIN AND MAX !
MAX
MI N
5
CHOOSE THERAPY
SETTINGS
• Select a pre-set timer mode.
(optional)
• Choose your desired temperature mode
HEAT or COOL.
• Select comfort level (1-10)
REFILL THE
RESERVOIR
• With unit running, pour additional
DISTILLED WATER ONLY
into the
reservoir.
• Monitor water fill level over the
next minute to make sure the
water level settles between the
“MIN” and “MAX” lines.
If this is the first time you are using the
unit, or the first time you have installed a
brace, the water from the reservoir will be
pumped into the chambers of the brace
during step 3. At this time, you will need
to re-fill your unit with Distilled Water.
The temperature can be adjusted during therapy by
pushing the (+) or (-) button to increase or decrease
temperature. You can also check the remaining time on
the timer (optional) by pushing
the previously chosen HEAT or
COOL button. The remaining
time will appear in the comfort
level window for 5 seconds and
then the display will return to the
comfort level setting.
MODE
HEAT
COOL
COMFORT LEVEL
HEAT
COOL
COMFORT LEVEL
BEFORE
POWERING ON
3
• Plug one end of the power
cord into the electric outlet,
and plug the other end into
the AC/DC adapter plug on
the unit (the control panel will
illuminate).
• Press the ON /OFF button
(the fan and pump will start
and the digital display will
now say “ON”).
THE BRACE MUST BE AT ROOM
TEMPERATURE AND LAYING FLAT. ENSURE
THE BRACE CHAMBER IS UNRESTRICTED,
FOLDED OR BLOCKED. BLOCKAGE COULD
CAUSE THE BRACE TO LEAK OR BREAK
DUE TO THE WATER PRESSURE!
MODE
HEAT
COOL
COMFORT LEVEL
AC/DC
Adapter
Plug
•Attach the white
connectors to
the connector
ports on the
front of the unit,
by aligning the
tabs and turning
clockwise by 90˚.
