The “Settings” menu button is shown below in Figure 25
3. Enter the IP address that was captured above in step 9 of “CONFIGURE THE NETWORK” section into the ThermaSol App IP
address field as shown below in Figure 26
4. Exit the settings menu using the Android back or home buttons and re-start the ThermaSol App
5. Confirm that the App connects to your hardware.
6. Go to page 18 of these instructions to learn to operate the ThermaSol SWM-2 App
17
THERMASOL.COM
I
800.776.0711
Figure 25: ThermaSol App Settings menu button
Figure 26: ThermaSol App IP address setting
Solitude Wireless Wi-Fi Controller Module Installation Instructions
81188 Rev A 02/16
8
Connecting A Networked Android Device