Thermasis Cortina 12 S Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 28

Thermasis Cortina 12 S Скачать руководство пользователя страница 2

Cortina S manuel Ver.01

2

1

DEAR CUSTOMER



Thank you for purchasing Cortina wood pellet boiler.



This instruction manual is intended to help you install and operate the product

safely, properlyand economically.



Please read this instruction manual right through and take note of the

safetywarnings.Keep all documentation supplied with this unit in a safe place for

future reference.



Do not touch or interfere any part of the product other than those allowed.



During installation and/or first start up the service engineer must carry out

thefollowing work.



The installation has to be performed by a qualified installer.



Please contact your authorised dealer if you have any questions.



For efficient and low-emission operation of your heating system, only use the

fuels specified in this instruction manual. Only then can efficient, low-emission,

and trouble-free operation of your heating system be guaranteed.



Carry out maintenance and cleaning work recommended on your heating system

at regular intervals. Details can be found later in the instruction manual. By doing

this, you will not only be ensuring the operational reliability of the heating

system but also its efficient and low-emission operation.

•

Your pellet boiler will automatically adjust its output between 30 to 100% of the
boiler’s rated power. Your heating system may have a lower or higher heat
demand than the boiler can deliver, for this reason we recommend a buffer tank
is installed. The buffer tank ensures operational reliability of the appliance and
improves heating response and energy saving. This ensures efficient and low-
emission operation of your boiler.

«
1
2
3
4
...
»

Содержание Cortina 12 S





























Отзывы:

Нет отзывов