Thermann 16LP50, Руководство по установке

Страница: 11 / 20

11 INSTALLATION INSTRUCTIONS
REMOTE CONTROLLERS
1. NUMBER OF CONTROLLERS
One, two or three remote control panels can be installed as optional extras.
2. CONTROLLER LOCATIONS
These controls are to be fitted in the following locations:
MAIN CONTROL - kitchen or laundry Model CMR-2254
BATHROOM CONTROL - main bathroom
Model YST-2254
ENSUITE CONTROL - second bathroom Model YST-2254S
IMPORTANT
DO NOT locate the remote controls where they may come into contact with water.
DO NOT position the remote controls in the vicinity of chemicals.
DO NOT
position the remote controls over a cooker, grill oven or toaster.
DO NOT position the remote controls where materials may spill onto them.
3. CONNECTION OF WIRING TO THE THERMANN UNIT
Remove the front cover from the unit.
Install the wiring to the Thermann main unit using conduit or by concealing the wires in the
wall cavity.
Install the wiring into the cabinet through the wiring access adjacent to the power cable.
Attach the wiring to the plate adjacent to the terminal block, using the cable clamp provided.
Then attach the wires to the terminals for the remote controls. Replace the front cover of the
water heater.