Thermaltronics TMT-ST10, Руководство пользователя

Страница: 8 / 13

5
TMT-ST10 Solder Tip Tester
USER MANUAL
UNPACKING/ASSEMBLY/OPERATION
Operation - Test Temperature
1. Turn on the TMT-ST10 tip tester.
2. The tip tester will default to Tip Temperature Test mode.
3. Press the "RESET" button to switch between Celsius (C) and Fahrenheit (F) display.
4. To test temperature, touch the solder tip onto the (6) Thermal Sensor. Allow a few seconds for
the reading to stabilize. Note: Do not push down forcefully with the solder tip as it may
damage the thermal sensor.
5. Click the "SAVE" button to save the tested value to (b) Tester Memory.
Operation - Test Tip to Ground Resistance
1. Turn on the TMT-ST10 tip tester.
2. Press the "SELECT" button once to toggle to the Tip to Ground Resistance (ohm) test mode.
3. Connect one end of the ground wire (ST-GWIRE) to the (4) Ground Connection Socket.
Connect the other end to the power strip or socket, to which the soldering iron is connected.
Note: The tester must share the same ground as the soldering iron.
4. To test Tip to Ground Resistance (ohm), place the solder tip onto the (5) Test Plate. Allow a few
seconds for the reading to stabilize.
5. Click the "SAVE" button to save the tested value to (b) Tester Memory.
Operation - Test Tip to Ground Leakage
1. Turn on the TMT-ST10 tip tester.
2. Press the "SELECT" button twice to toggle to the Tip to Ground Leakage (mV) test mode.
3. Connect one end of the ground wire (ST-GWIRE) to the (4) Ground Connection Socket.
Connect the other end to the power strip or socket, to which the soldering iron is connected.
Note: The tester must share the same ground as the soldering iron.
4. To test Tip to Ground Leakage (mV), place the solder tip onto the (5) Test Plate. Allow a few
seconds for the reading to stabilize.
5. Click the "SAVE" button to save the tested value to (b) Tester Memory.
Operation - Saving Test Data
1. Ensure that at least one test parameter is saved to (b) Tester Memory (LCD Display Row 2)
2. Long Press the "SAVE" button for 3 seconds to save the test data from (b) Tester Memory to
long term data storage which can be downloaded to a computer at a later time.
3. If save is successful the (c) Info Display will show the message "Saved to memory"