Thermaltronics TMT-ST10, Руководство пользователя

Страница: 6 / 13

3
TMT-ST10 Solder Tip Tester
USER MANUAL
CONTROL PANEL
LCD Display
The display has three rows of data.
(a) Current Test Data - Row 1 - Shows the current test data in large characters.
(b) Tester Memory - Row 2 - Shows the current saved data in temporary memory. It is divided into
3 segments: temperature, tip to ground resistance and tip to ground leakage.
All segments showing data are temporarily held in the tester memory, however if no data is
recorded, the segment will show "---".
(c) Info Display - Row 3 - Shows info messages such as notices and alerts. If no info message is
displayed, the date & time in YY-MM-DD HH:MM format will be shown.
Function Buttons
(d) Reset Button has different functionality in different modes:
● In Temperature mode, pressing "RESET" will toggle display between °C and °F.
● In Tip to Ground Resistance mode (ohm), pressing "RESET" will reset (a) Current Test Data to
zero. Note: Restarting the test meter will clear the calibration.
● In Tip to Ground Leakage mode (mV), pressing "RESET" will reset (a) Current Test Data to
zero. Note: Restarting the test meter will clear the calibration.
(e) Hold Button - pressing the "HOLD" button will instruct the tester to display only the maximum
test value. Press "HOLD" again to release hold mode.
(f) Select Button - pressing the "SELECT" button toggles the test mode between Tip Temperature,
Tip to ground resistance (ohm) and Tip to ground leakage (mV).
(g) Save Button has different functionality based on the length of time the button is pressed held.
● Short Click - pressing and holding the "SAVE" button for less than 3 seconds saves the (a)
Current Test Data to (b) Tester Memory (LCD Display Row 2).
● Long Press - pressing and holding the "SAVE" button for more than 3 seconds will save the
data from (b) Tester Memory to data storage. Afterwards the data can be downloaded to a
computer through the mini USB port.
(a) Current Test Data
(b) Tester Memory
(c) Info Display
(d) Reset Button (e) Hold Button (f) Select Button (h) Save Button