User's Manual
VB6000B Series - Swing
IEEE 1394 firewire connection
There are eight wires (two GND, VG, VP, TPA+,
TPA-, TPB+, TPB-)with connectors coming rom
the IEEE 1394 of the case. Please consult your
motherboard manual to find out the position of
IEEE 1394 connection on your motherboard.
You can see 10-pins in two rows.
9
10
3.4 Ear & MIC connections
Please consult your motherboard manual to find
out the section of "front panel audio connector".
1.connect "MIC-VCC" to "MIC POWER"
or "MICPWR" on your motherboard
- Power pin
: connect VP connector to it.
- Ground pin
: connect VG connector to it ( next to the VP connector)
- Data pin
: connect TPB- connector to the TPB- data pin,
connect TPB+ connector to the TPB+ data pin,
connect TPA- connector to the TPA- data pin, connect TPA+
connector to the TPA+ data pin.
- Ground pin
:
Connect two GND connectors to the other two
GND ground pins
2.connect "MIC-IN" to "MIC INPUT"
or "MIC2" on your motherboard.
3.connect "GND" to "GROUND"
or "AGND" on your motherboard.
4.connect "EAR L" to "AUD_FRONT_L"
and "EAR R" to "AUD_FRONT_R".
5.connect "LINE L" to "AUD_RET_L"
and "LINE R" to "AUD_RET_R".
TM
The Thermaltake Silent Purepower specification meets Intel
Pentium 4 and AMD K7; it offers plenty of functions, which mainly
include:
TM
4.1
Purepower
power supply (optional)
4.Over current protection.
3.Over voltage protection / Under voltage protection.
2.Short circuit protection on all output.
o
o
1.Over thermal protection at 100 C-105 C
TM
The functions can assure the Silent Purepower meet the balance in
TM
noise control and heat exhausted. The Silent Purepower provides
complete protection function as follow:
2.Ultra Silent:
Ball bearing fans with high reliability and super low
acoustic noise under all load condition.
TM
1.Automatic Fan Speed Control:
The Silent Purepower power
supply can detect the inside heat and automatically adjust the fan
speed to provide adequate airflow.
Besides, Thermaltake enables the quality assurance of the Silent
TM
Purepower : 100% Hi-POT and ATE Function Test, 100% Burn-In and
AC Input cycled on/off under high temperature condition. Furthermore,
it has been approved by
UL, CSA, TUV, VDE, NODIC, CB, FCC, CE,
CNS.
There are three main products of Thermaltake PSU, it is divided into
standard, VR and specialty power supply unit. Please refer to
http://www.thermaltake.com/purepower/main.htm
