Thermaltake Muse X-Duo RAID, Руководство пользователя

Страница: 18 / 93

12
Step 3. Connect to Power
1. Make sure that your storage system is turned off (Power switch on the “ O ”
position).
2. Plug the DC cord of the AC adapter to the power connector ( DC IN ) on the
rear of the storage system ( ).
3. Plug the female end of the AC power cord to the AC adapter and the male
end to an electrical outlet (
).
CAUTION:
When you disconnect the AC adapter, disconnect from the electrical outlet first and then
from the storage device. A reverse procedure may damage the AC adapter or the
storage device.
When unplugging the connector, always hold the plug head. Never pull on the cord.
Step 4. Configure Your Storage System
See the next chapter for the software configuration instructions.