Thermal Technology WABO NTA 100L, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 16

Thermal Technology powered by Carbon Fiber Heating SRL - Str Calea Borsului Nr 53B - 410605 Oradea (BH) Romania
Phone: + 39 0423 858589 - www.thermaltt.com - info@thermaltt.com
11
Press for confirmation or for exit without confirmation the change.
CLOCK TIMER SETTING:
The controller allows setting of maximum 2 operating intervals, for each of them it is
possible to choose the desired temperature. Press key, the display will show
PAR ,
press or key until the display will show the wording CRONO press the key
to enter. By pressing and the display will indicate:
ON 1 setting switch on time for interval 1
TMP 1 setting the desired temperature for interval 1
OFF 1 setting switch time for interval 1
ON 2 setting switch on time for interval 2
TMP 2 setting the desired temperature for interval 2
OFF 2 setting switch off time for interval 2
Press key to access the parameter and set it.
To remove an operation interval, modify the hour until the display will indicate
--:--
flashing.
EXAMPLE:
Setting interval 1, starting at 06:00 and finishing at 08:15 with a set point temperature of 65°C .
Press key, the display will indicate the wording PAR , press or until the
display will indicate the wording CRONO press the key to enter.
The display will indicate ON 1 , press key .
The display will indicate the wording --:-- flashing or the activation time set before.
Press the or to set the activation time until you see
06:00
, then press key,
the display will indicate TMP 1 , press the button the display will indicate S.60°C
flashing. Using the keys or set the temperature S. 65°C and press key.
The display will indicate the wording OFF 1 press key. The display shows --:--
flashing or activation hour set before.