Thermal Dynamics CUTMASTER SL100SV, Руководство по эксплуатации

Страница: 57 / 172

Manual 0-4640 4-15 OPERATION
4
4.10 Cutting Speed Charts: Stainless Steel, SL100 Torch with Exposed Tip
NOTES
* Gas pressure shown is for torches with leads up to 25' / 7.6 m long. For 50' / 15.2 m leads, set gas pressure to 80 psi / 5.5 bar.
This information represents realistic expectations using recommended practices and well - maintained systems.
Actual speeds may vary up to 50% from those shown.
Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector
9-8215 9-8213 9-8237 9-8243
Art # A-04203
Table: Dry
Gas: Compressed Air
Material thickness Tip Current
Plasma
Press.*
Pierce
Time
Arc
voltage
Stand-off
Height
Recommended
Travel Speed
In GA mm Cat. # Amps PSI In mm SEC Volts in mm IPM mm/min
0.038 20 0.95 8-8208 40 65 0.188 4.8 0.00 103 0.19 4.80 357 9067.8
0.050 18 1.27 8-8208 40 65 0.188 4.8 0.00 104 0.19 4.80 287 7289.8
0.063 16 1.60 8-8208 40 65 0.188 4.8 0.10 104 0.19 4.80 244 6197.6
0.078 14 1.98 8-8208 40 65 0.188 4.8 0.30 105 0.19 4.80 125 3175
0.135 3.43 8-8208 40 65 0.188 4.8 0.40 105 0.19 4.80 106 2692.4
0.141 10 3.58 8-8208 40 65 0.188 4.8 0.50 106 0.19 4.80 104 2641.6
0.188 4.78 8-8208 40 65 0.188 4.8 0.60 106 0.19 4.80 75 1905
0.250 6.35 8-8208 40 65 0.188 4.8 1.00 109 0.19 4.80 46.6 1183.64
0.375 9.53 8-8208 40 65 NR NR NR 109 0.19 4.80 31.5 800.1
0.500 12.70 8-8208 40 65 NR NR NR 112 0.19 4.80 17.4 441.96
0.625 15.88 8-8208 40 65 NR NR NR 114 0.19 4.80 10 254
Material: Stainless Steel
Pierce Height
Torch: SL100 with Exposed Tip and Deflector
Power Supply: CutMaster 51 Automated