27
Feature Description
Voltage Reduction Device (VRD)
(shipped activated, field-capable)
See Section 11 for de-activation
instructions.
Reduces the OCV when the power supply is not in use.
Eliminates the need for add on voltage reducers and has
no effect on arc starting.
•
VRD fully complies to IEC 60974-1
•
When Stick mode is selected the green VRD light is
ON when not welding and red when welding.
•
When in TIG modes VRD is OFF.
Control Knob
•
For the selected weld parameter, rotating the knob
clockwise increases the parameter.
•
Rotating the knob counter-clockwise decreases the
parameter.
•
A selected weld parameter value can be adjusted at any
time even while welding.
•
Pushing the knob in sets the selected parameter then
displays the next parameter.
Self Diagnosis Using Error Codes
•
An error code is displayed on the Digital Meter when a
problem occurs with Mains supply voltage or internal
component problems.
Save/Load Function
•
A total number of 5 programs can be saved into the
200AC/DC memory.
SAVE
the Current Weld Parameters into Memory
•
Press and HOLD the
SAVE
button. Beep will sound
and Digital Meter display will show a number 1.
•
Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will give a
beep to confirm the weld parameters are loaded onto the
control panel.
LOAD
(retrieve) a Program to Control Panel
•
Press and HOLD the
LOAD
button. Beep will sound and
Digital Meter display will show a number 1.
•
Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will give a
beep to confirm the weld parameters are loaded onto the
control panel.
