manualshive.com logo in svg

Thermal Arc 260S CC STICK, Руководство по эксплуатации, Страница: 16 / 44

Поделиться
Скачать
Thermal Arc 260S CC STICK Скачать руководство пользователя страница 16

GENERAL

12

MANUAL 430429-447

1.07 DECLARATION OF CONFORMITY

Manufacturer: 

Thermal Arc INC

Address:

2200 Corporate Drive
TROY,OHIO 45373-1085,USA

The equipment described in this manual conforms to all applicable aspects and regulations of the 'Low
Voltage Directive' (European Council Directive 73/23/EU, as recently changed in Directive 93/63/EU)
and to the National legislation for the enforcement of this Directive.

The equipment described in this manual conforms to all applicable aspects and regulations of the "EMC
Directive" (European Council Directive 89/336/EEC) and to the National legislation for the enforcement
of this Directive.

Serial numbers are unique with each individual piece of equipment and details description, parts used to
manufacture a unit and date of manufacture.

National Standard and Technical Specifications

The product is designed and manufactured to a number of standards and technical requirements among
them are:
* CSA (Canadian Standards Association) standard C22.2 number 60-M1990 for Arc welding equipment.
* UL (Underwriters Laboratory) rating 94VO flammability testing for all printed-circuit boards used.
* CENELEC EN50199 EMC Product Standard for Arc Welding Equipment March 1995.
* IEC 974-1 (BS 638-PT10) (EM 60 974-1) applicable to welding equipment and associated accessories.
* Extensive product design verification is conducted at the manufacturing facility as part of the routine

design and manufacturing process, to ensure the product is safe and performs as specified. Rigorous
testing is incorporated into the manufacturing process to ensure the manufactured product meets or
exceeds all design specifications.

Thermal Arc INC has been manufacturing products that perform in a safe manner for more than 30
years and will continue to achieve excellence in our area of manufacture.

Manufacturers responsible representative:

David Ashworth
Vice President & Managing Director
Thermadyne Europe

 

Chorley England.

Содержание 260S CC STICK













































Отзывы:

Нет отзывов