Thermal Arc 175 SE ARC MASTER, Руководство по эксплуатации

Страница: 20 / 44

ARC MASTER 175 SE INTRODUCTION
Manual # 0-5054 2-2 March 20, 2008
2.07 Specifications
W1002902
Welding current range 5 - 175 Amps
Nominal DC Open Circuit Voltage (OCV) 65
175A @ 20%, 27.0V
110A @ 60%, 24.4V
80A @ 100%, 23.2V
Rated input current (A) for STICK Welding 40A
I
Ƞ
= 175A @ 27V
Rated input current (A) for TIG Welding 25A
I
Ƞ
= 175A @ 17V
Rated output for STICK Welding 175A @ 20%, 27V
Rated output for TIG Welding 175A @ 20%, 17V
Duty cycle (%) 175 @ 20%
Welder type Inverter Power Source
Output Terminal Type Dinse™ 50
Number of Phases Single Phase
Nominal Supply Voltage AC 230 ±15%
Nominal supply frequency 50/60 Hz
Effective Input Current (l1eff) 17 Amps
Maximum Input Current (l1 max) Δ 40 Amps
Single Phase Genorator Requirements 1 KVA
Protection Class IP23S
Standard(s) EN 60974-1
EN50199
Cooling Method Fan Cooled
Welding power source mass 14.33lb (6.5kg)
H 13.0" x W5.1" x D 9.0"
(H 330mm x W 130mm x D 230mm)
Power Source Part Number
Welding Output
Welding output, 40ºC, 10 min. (quoted figures refer to SMAW
output)
Dimensions and Weight
Dimension power source (DxWxH)
Mains Power
Classification
∆ Motor start fuses or thermal circuit breakers are recommended for this application. Check local
requirements for your situation in this regard.
NOTE
Thermal Arc continuously strives to produce the best product possible and therefore reserves the
right to change, improve or revise the specifications or design of this or any product without prior
notice. Such updates or changes do not entitle the buyer of equipment previously sold or shipped
to the corresponding changes, updates, improvements or replacement of such items.
The values specified in the table above are optimal values, your values may differ. Individual equip-
ment may differ from the above specifications due to in part, but not exclusively, to any one or
more of the following; variations or changes in manufactured components, installation location
and conditions and local power grid supply conditions.