Notice NOT 020
THERMAL ARC 155 SE
Rev : 02
Date : 25/10/06
USING
USER’S MANUAL
Page
17/22
11.
WELDING
Connect the power source to the main supply and the ground as explained in the chapter « Setting up » (
as
para -
6 and 7
). The THERMAL ARC 155 SE unit automaticaly recogonizes the value of the power supply.
Connect the ground cable and the electrode-holder to the appropriate power conne (
F2
) and - (
F5
)
according to the electrode polarity being used (refer to the electrodes manufacturer’s datasheets).
Start up the power source with the switch ON/OFF (
B2
).
When you start the power source, the orange indicator (
F3
) illuminates but goes out immediatly if no failure has
been found.
The green indicator (
F4
) illuminates and indicates that the machine is live.
Adjust welding current with potentiometer (
F1
)
Place the electrode on the piece you have to weld in order to strike the arc.
Arc force control
Adjustment of arc force control is not possible, but it is optimised for welding with a large range of rutile and basic
electrodes.
Содержание 155 SE
Страница 1: ...THERMAL ARC 155 SE USER S MANUAL...
Страница 21: ...16 WIRING DIAGRAM...
