English 4
6. Connect the blower to the extractor hood with an
extension cable if required.
Use the added connector to hard-wire to the blower, if
required.
Use the wire diagram for connecting.
NOTE:
Confirm that the blower is securely attached to the
wall and all connections are secure.
NOTE:
The unit can also be installed on the roof in
combination with a roof plate accessory (RFPLT600P or
RFPLT1000P). Ask your retailer or contact the Thermador
Customer Service Team at 1-800-735-4328.
WARNING
•
The additional cover on the plug must always be
attached and closed for safety reasons.
•
Not needed wires must be isolated, capped with wire
nuts and stored in a safe position.
(21 mm)
(21 mm)
13
/
16
"
13
/
16
"
13
/
16
"
