25
3.
Fill the water tank with cold water up to the “max.”
mark (figure
"
)
4.
Fully close the tank cover until it locks.
5.
Insert the filled water tank (figure
#
).
6.
Ensure that the water tank has been pushed in all the
way. The water tank should be level with the tank
cavity (figure
$
).
7.
Close the appliance door.
After Every Steam Operation
9
WARNING
RISK OF SCALDING
Hot steam can escape when you open the
appliance door. Steam is not visible at certain
temperatures. Do not stand too close to the
appliance when opening it. Open the appliance
door with caution. Keep children away.
9
WARNING
RISK OF BURNS
The appliance grows hot during operation. Let
appliance cool down prior to cleaning.
NOTICE:
ENAMEL DAMAGE: Do not start any
operations when there is water on the oven cavity floor.
Before the operation, wipe the water from the oven cavity
floor.
The remaining water is pumped back into the water tank
after every operation with steam. Then empty and dry the
water tank. Moisture remains in the oven cavity. To dry
the oven cavity, you can either use the "Drying
ª
"
operating mode or dry the oven cavity by hand.
Notes
▯
Once the appliance has been switched off, the display
remains lit for a little longer to remind you to empty the
water tank.
▯
Remove limescale marks with a cloth soaked in
vinegar, then wipe with clean water and dry with a soft
cloth.
Empty Water Tank
NOTICE:
▯
Do not dry the water tank in the hot oven cavity. This
will damage the water tank.
▯
Do not clean the water tank in the dishwasher. This will
damage the water tank.
1.
Open the appliance door.
2.
Remove the water tank.
3.
Empty the water tank, clean it with detergent and then
rinse it thoroughly with clean water.
4.
Dry all parts with a soft cloth.
5.
Rub the seal on the cover until dry.
6.
Leave to dry with the cover open.
7.
Close the cover on the water tank and push it down.
8.
Insert the water tank and close the appliance door.
Starting Drying
During drying, the oven cavity is heated up so that the
moisture in the oven cavity evaporates. When the Drying
mode is complete open the appliance door so that the
steam escapes.
1.
Let the appliance cool down.
2.
Remove the worst of the food remnants from the oven
cavity immediately and use a sponge to wipe away
moisture from the oven cavity floor.
3.
Turn the function selector to CLEAN MODES.
4.
On the touch display, swipe to the left or right to select
"Drying
ª
".
5.
Touch the bottom touch field.
The duration is displayed. It cannot be changed.
6.
Touch the bottom touch field.
After a few seconds the drying function starts and
ends automatically after 10 minutes.
7.
Open the appliance door and leave it open for 1 to
2 minutes so that the moisture in the oven cavity can
escape.
Drying the Oven Cavity by Hand
1.
Let the appliance cool down.
2.
Remove any soil from the oven cavity.
3.
Dry the oven cavity with a sponge.
4.
Leave the appliance door open for 1 hour so that the
oven cavity dries completely.
