background image

READ AND SAVE THESE INSTRUCTIONS

WARNING - TO REDUCE THE RISK

WARNING - TO REDUCE THE RISK

WARNING - TO REDUCE THE RISK

WARNING - TO REDUCE THE RISK

WARNING - TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR

OF FIRE, ELECTRIC SHOCK, OR

OF FIRE, ELECTRIC SHOCK, OR

OF FIRE, ELECTRIC SHOCK, OR

OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE

INJURY TO PERSONS, OBSERVE

INJURY TO PERSONS, OBSERVE

INJURY TO PERSONS, OBSERVE

INJURY TO PERSONS, OBSERVE
THE FOLLOWING:

THE FOLLOWING:

THE FOLLOWING:

THE FOLLOWING:

THE FOLLOWING:

CAUTION:  FOR GENERAL VENTI-

CAUTION:  FOR GENERAL VENTI-

CAUTION:  FOR GENERAL VENTI-

CAUTION:  FOR GENERAL VENTI-

CAUTION:  FOR GENERAL VENTI-
LATING USE ONLY.  

LATING USE ONLY.  

LATING USE ONLY.  

LATING USE ONLY.  

LATING USE ONLY.  DO NOT

DO NOT

DO NOT

DO NOT

DO NOT USE

 USE

 USE

 USE

 USE

TO EXHAUST HAZARDOUS OR

TO EXHAUST HAZARDOUS OR

TO EXHAUST HAZARDOUS OR

TO EXHAUST HAZARDOUS OR

TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS OR VA-

EXPLOSIVE MATERIALS OR VA-

EXPLOSIVE MATERIALS OR VA-

EXPLOSIVE MATERIALS OR VA-

EXPLOSIVE MATERIALS OR VA-
PORS.

PORS.

PORS.

PORS.

PORS.

A. Use this unit only in the manner

intended by the manufacturer.  If
you have questions, contact the
manufacturer.

B. Before servicing or cleaning the

unit, switch power off at service
panel and lock service panel
disconnecting means to prevent
power from being switched on
accidentally.  When the service
disconnecting means cannot be
locked, attach a tag to the service
panel to indicate power has been
switched off for maintenance.

INSTALLATION INSTRUCTIONS

PHE WALL HOOD

APPROVED FOR ALL

 RESIDENTIAL APPLIANCES

FOR RESIDENTIAL USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

INST

INST

INST

INST

INSTALLA

ALLA

ALLA

ALLA

ALLATION MUST COMPL

TION MUST COMPL

TION MUST COMPL

TION MUST COMPL

TION MUST COMPLY Y Y Y Y WITH 

WITH 

WITH 

WITH 

WITH ALL LOC

ALL LOC

ALL LOC

ALL LOC

ALL LOCAL CODES.

AL CODES.

AL CODES.

AL CODES.

AL CODES.

IMPORTANT:

IMPORTANT:

IMPORTANT:

IMPORTANT:

IMPORTANT:

 Save these Instructions for the Local Electrical Inspector’s use.

INSTALLER:

INSTALLER:

INSTALLER:

INSTALLER:

INSTALLER:

 Please leave these Instructions with this unit for the owner.

OWNER:

OWNER:

OWNER:

OWNER:

OWNER:

 Please retain these instructions for future reference.

Safety Warning: Turn off power circuit at service panel and lock out panel,

Safety Warning: Turn off power circuit at service panel and lock out panel,

Safety Warning: Turn off power circuit at service panel and lock out panel,

Safety Warning: Turn off power circuit at service panel and lock out panel,

Safety Warning: Turn off power circuit at service panel and lock out panel,

before wiring this appliance.

before wiring this appliance.

before wiring this appliance.

before wiring this appliance.

before wiring this appliance.

Requirement: 120 V AC, 60 Hz. 15 or 20 A

Requirement: 120 V AC, 60 Hz. 15 or 20 A

Requirement: 120 V AC, 60 Hz. 15 or 20 A

Requirement: 120 V AC, 60 Hz. 15 or 20 A

Requirement: 120 V AC, 60 Hz. 15 or 20 A

FILE # E21958

LI06EC  Ed. 10/98

C. Installation Work and Electrical

Wiring Must Be Done By
Qualified Person(s) In Accor-
dance With All  Applicable
Codes & Standards, Including
Fire-rated Construction.

D. Sufficient air is needed for

proper combustion and ex-
hausting of gases through the
flue (chimney) of fuel burning
equipment to prevent back-
drafting.  Follow the heating
equipment manufacturers
guideline and safety standards
such as those published by the
National Fire Protection Asso-
ciation (NFPA), the American
Society for Heating, Refrigera-
tion and Air
Conditioning
Engineers
(ASHRAE), and
the local code
authorities.

Содержание PHE 30





















Отзывы: