Thermador DWHD Series, Руководство по установке

Страница: 11 / 58

11
Installation of Mounting Brackets
•
Top Mount is used for counter tops made of wood or
other materials that can be easily drilled . If you have
solid surface, marble, granite, or other very hard counter-
tops, skip to step 9 now .
•
If insulation is covering the area in 8a, fold it back .
•
Orient the mounting brackets (C) for top mounting as
shown in 8b .
•
Using pliers, bend side flanges down as shown in 8c and
8d so the bracket will not slip out of slot in frame . Do not
attach to cabinet yet .
Avoid Tip Over Hazard!
Do not use the dishwasher until it is completely
installed . When opening the door on an uninstalled
dishwasher, carefully open the door while supporting
the rear of the unit . Failure to follow this warning can
result in serious injury .
WARNING
Note: Before installing the supplied counter top mounting
brackets, decide which method of securing the dishwasher
into its enclosure will be used .
Once the mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the mounting
brackets and the dishwasher .
If you have a Fully Integrated Panel, do not attach mounting
brackets until after attaching the panel to the door .
8
•
Side Mount is used for counter tops made of marble,
granite, or other very hard materials that cannot be easily
drilled .
•
Grasp mounting bracket (C) with pliers and fold bracket at
the perforation over onto itself as shown in 9a .
•
Slip bracket flange through side slots in frame as shown
in 9b .
•
Using pliers, bend side flanges down as shown in 8c and
8d so the bracket will not slip out of slot in frame . Do not
attach to cabinet yet .
9 !