PAGE 6
4.
Wipe up any accumulated grease or food in the
"clean out" area. Use a general household degreasing
spray or cleaner. Rinse and dry.
5.
Replace the access panels and mounting channel.
Tighten the wing nuts securely.
6.
Plug in the electrical cord for the Cook‘n’Vent
®
.
TO REACH THE CLEAN OUT AREA
1.
Unplug the electrical cord for the Cook‘n’Vent
®
.
2.
Unscrew the wing nuts on the top of the access
panels as illustrated above. Lift out mounting chan-
nel and panels.
3.
Avoid the electrical connection box above the ac-
cess panels. Be careful when working around the
metal framework of the" clean out" area as there
may be sharp edges.
OCCASIONAL COOK‘N’VENT
®
CARE
Approximately every six months, remove any food soil
that may have collected behind the access panels. The
30" and 36" models have two removable access panels;
the 45" model has 3 panels.
The access panels to the "clean out" area are beside
the blower (cabinet installation) or duct transition (re-
CARE AND CLEANING
mote blower installation). See illustration below. The
electrical connection box above the clean out area must
be accessible for electrical inspection or service only.
DO NOT TOUCH OR CLEAN the electrical connec-
tion box.
Electrical
Connection
Box:
DO NOT OPEN
"Clean Out" Area
2 Access Panels
(3 in 45")
Mounting Channel
Wing Nuts
VTN600R CABINET BLOWER INSTALLATION AND ACCESS PANELS
Cabinet Blower
Data Plate
Intake
