ThermaCell LIV, Руководство по установке

Страница: 5 / 8

LAY IT ALL OUT
Lay each repeller according to your plan outlined in Step 1. Lay the cables between repellers to
ensure you have enough cable length to route around any obstacles.
MOUNT THE HUB
The Smart Hub should be located near an outdoor outlet in an
area with strong Wi-Fi signal. Check Wi-Fi signal on your phone
before installing any components. Once adequate signal is
confirmed, prepare to mount the hub to a wall, post, or stake no
more than 6 feet from the power outlet and at least 30 inches off
the ground to avoid exposure to water and snow. Use the
template provided to drill the 2 mounting screws and hang the
hub in place.
Note: If mounting onto brick or other masonry, concrete anchors
and an appropriate drill bit will be required.
1
Feeling inspired? Use the grid below to map your install. Consider outlet location, repeller placement and mounting
preference, and cable pathways.
MAP IT OUT
3
2
PLAN
INS
TALL
C
ONNEC
T
Note: Repellers provide 360 degrees of protection; for best results, place a repeller within 10 feet of the areas most
commonly used, like patio chairs, grills, tables, walkways, etc. For continuous area protection, space repellers 20 feet
apart.