manualshive.com logo in svg

therM TA150KGMR1, Руководство пользователя

Поделиться
Скачать
therM TA150KGMR1 Скачать руководство пользователя страница 2

Owner's Manual for TA150KGMR1 Pneumatic Winches for Personnel Lifting

page 2

A12876A-1214

Warranty Statement

Thern, Inc. warrants each new products to be free from defects in material and workmanship under normal use and 

service for a period of 24 months from the date of purchase by the original using buyer. Genuine Thern, Inc. replace-

ment parts and components will be warranted for 30 days from the date of purchase, or the remainder of the original 

equipment warranty period, whichever is longer.

Under no circumstances will this warranty cover an product or component thereof, which, in the opinion of the 

company, has been subjected to misuse, unauthorized modifications, alteration, an accident or shipping damage. This 

warranty also shall not apply to products that are operated improperly, improperly maintained or improperly stored.

This warranty does not cover any costs for removal of our product, downtime, or any other incidental or consequential 

costs or damages resulting from the claimed defects. Brake discs, wire rope or other wear components are not covered 

under this warranty, as their life is subject to use conditions which vary between applications. Any alteration, repair or 

modification of the product outside the Thern, Inc. factory shall void this warranty.

Thern, Inc. in no way warrants pneumatic, hydraulic or electric motors and control valves  or other trade accessories  

since these items are warranted separately by their respective manufacturers.

FACTORY AUTHORIZED REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE 

EXCLUSIVE REMEDY TO THE CONSUMER. THERN, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL 

OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS 

PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN 

DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on 

how long an implied warranty lasts, so the above limitation or exclusion may not apply to you. This warranty gives 

you specific legal rights, and you may also have other rights which vary from state to state.

To make a claim under this warranty, contact the factory for an RGA number. The product must be returned, 

prepaid, directly to Thern, Inc. or to an authorized service center. A completed warranty claim form must ac-

company the product. If the product is found to be defective, it will be repaired or replaced free of charge, and 

Thern, Inc. will reimburse the shipping costs.

 

Note: Thern, Inc. reserves the right to change the design or discontinue the production of any product without 
prior notice.

About This Manual

The Occupational Safety and Health Act of 1970 states that it is the employer’s responsibility to provide a workplace 
free of hazard. To this end, all equipment should be installed, operated, and maintained in compliance with applicable 
trade, industrial, federal, state, and local regulations. It is the equipment owner's responsibility to obtain copies of 
these regulations and to determine the suitability of the equipment to its intended use.

This Owner’s Manual, and warning labels attached to the equipment, are to serve as guidelines for hazard-free 

installation, operation, and  maintenance. They should not be understood to prepare you for every possible situation.

The information contained in this manual is applicable only to the Thern TA150KGMR1 Pneumatic Winches. Do not 

use this manual as a source of information for any other equipment.

  The following symbols are used for emphasis throughout this manual:
 
  Failure to follow ‘WARNING!’ instructions may result in equipment damage,    

  property damage, and/or serious personal injury.
 
  Failure to follow ‘CAUTION!’ instructions may result in equipment damage,    

  property damage, and/or minor personal injury.
 Important!

  Failure to follow ‘important!’ instructions may result in poor performance of the  

 equipment.

Please record the following:

Date Purchased:

Model No.:

Serial No.:

This information is required when 

calling the factory for service.

Содержание TA150KGMR1













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды