THERM-OZ RENO KIT, Инструкция по эксплуатации

Страница: 3 / 18

T
I
L
E
T
I
L
E
T
I
L
E
T
I
L
E
THERM-OZ RENO KIT
WHAT PARTS TO USE
CROSS SECTION OF WALL
CROSS SECTION OF WALL
FIG 1
FIG 2
BOX A
YOUR OLD SHOWER VALVES
WILL BE SCREWED INTO A
BRASS BREECH THAT IS SET
IN THE WALL. IF THE BREECH
IS PRETTY MUCH FLUSH WITH
THE TILES ,LIKE FIG 1 , YOU
WILL NEED TO USE
TO FIND OUT WHICH PARTS OF THE RENO KIT YOU NEED, SEE THE
TWO TYPES OF SCENARIOS THAT YOU MIGHT HAVE IN YOUR SHOWER.
BRASS BREECH
BRASS BREECH
SET BACK
SET BACK A MAXIMUM OF
5mm. ANY MORE THAN 5mm,
SEE BELOW
MIN 6mm
MAX 75mm
REMOVE YOUR OLD VALVE
REMOVE YOUR OLD VALVE
BOX B
IF THE BREECH IN THE WALL
IS SET BACK MORE THAN
5mm UP TO 75mm,
THEN USE ADDITIONAL
PARTS IN
THESE PARTS CAN ALSO BE USED IF
YOU ARE TILING ON TOP OF YOUR
EXISTING TILES.
DISGUARD PARTS NOT USED, OR
KEEP AS SPARES
TURN OFF WATER SUPPLY AND
REMOVE OLD VALVES AND
SHOWER HEAD, ENSURING ALL
WATER IS DRAINED FROM THE
BREECH & CLEAN OF DEBRIS.
PAGE 2.
NOTE. YOU ONLY NEED TO USE THE PARTS IN BOX B IF THE BREECH IN THE WALL IS SET
BACK MORE THAN 5mm