therm-ic ThermicDryer, Инструкция по эксплуатации

Страница: 6 / 56

6
INSTRUCTIONS FOR USE / ENGLISH
covered or dirty.

If the cable or housing parts are damaged or if
the air intake or outlet openings are blocked or
damaged, send the unit to a dealer for repair.

Repairs to electrical equipment may only be
carried out at specialised repair facilities. Impro-
per repair could create substantial danger for the
user.

Never wind the power cable around the unit.

When not in use store the unit folded and in a dry
place.

Do not leave this device switched on while
unattended.

The unit must not be used for any purpose other
than that intended.
TECHNICAL DATA
230V version: 230V~ 50Hz 50W
120V version: 120V~ 60Hz 50W
SAFETY FUNCTIONS

Overheating protection

Temperature control
FUNCTION DESCRIPTION

Dries completely soaked boots or gloves effi-
ciently in a few hours without damaging the mate-
rial.

The air flowing from the nozzles in the shoe
reaches a temperature of approx. +20ºC above
room temperature.

Collapses to a small size and is extremely quiet.
IMPORTANT USAGE NOTES

Open the unit (1)

Take out the tubes and point the nozzles in the
direction of the toe of the boot (in the maximum
position, the tubes can be locked) (2).

Slide the tubes into the boot (3).