TheraSauna TS4544, Руководство пользователя и инструкция по сборке

Страница: 10 / 20

10
8. Screw two furniture bolts into holes in threshold
inside door opening. Note: Some adjusting may
be necessary to line up holes in threshold and
threaded receivers in base using hex wrench
provided.
9. Step into sauna and facing the back wall, find two
black cords in the left side top channel of back
wall. Remove foam strips from top channel of left
and right sidewall. Extend one cord down the
channel of the back wall into the channel of the
right sidewall to the right hand corner of front wall
channel. Plug in cord with reciprocal end of cord
from front wall. Note: Excess cord should be
woven into front or back wall.
10. Extend second cord down the channel of the left
sidewall to the right hand corner of the front wall
channel. Plug in cord with reciprocal end of cord
from front wall. Tuck in cords and reinstall foam
strips.
11. Set roof (Figure 5, page 5) on sauna making sure
top trim extends down over walls all the way
around. If trim does not extend over walls all the
way around, rotate top ¼ turn.
12. Install light plug connector on light (Figure 9, page
6) into connector coming out of front wall. Screw
securely to the wall with light mounting screw
(Figure 10, page 6).
13. Install doorknobs (Figure 8, page 6) by placing
doorknob bolt through hole in door. At the same
time place one knob onto the bolt on the outside
and the other knob onto the bolt on the inside until
both are tight against the door.
Fully Assembled TheraSauna.