background image

 Page 14 of  15 

THERALUX TVS Pro WARRANTY  

 

Theraflo TVS carries a 3-year limited warranty and is structured in the following way: 
 

 

2 years warranty on motor 

 

 

1 year warranty on mechanical seal 

 

 

3 years on all other parts 

 

 

Our warranty covers manufacturing faults, not wear and tear. We will, at our discretion, repair or replace 

the faulty material or part. It is your responsibility to notify Theralux at the earliest possible time of any 
issues found within the warranty period.  
 
Proof of purchase is required to be presented with any warranty claim submission.  

 
This warranty does not apply to any misuse of the pool pump, negligence or incorrect installation. We 
will not cover any damage due to the pool pump running dry, incorrect chemical balance of pool water, 

flood damage, damage caused by running the pump off an extension cord, damage caused by foreign 
material blocking the impeller (pebbles, organic matter, toys, etc.) or if the pool pump is used for any 
other purpose other than a swimming pool.  
 

We will not be liable for any incidental or consequential damages, loss of time, inconvenience, incidental 
expenses, labour or material charges in connection with the removal or replacement of the equipment, 
or costs of transporting the goods.  

 
We will not be liable for compensation or damages to any person for any loss, injury or damage to any 
person or property whatsoever, occasioned by or as a result of the use of this equipment.  
 

Please Note: Labour and service calls are not included in this warranty.  
 
Any Theralux TVS Pro pool pumps found in a commercial application will only carry a 12 month warranty 
from date of purchase.  

 
 
Register your product warranty online at www.theralux.com.au or send a copy of proof of purchase to 

PO BOX 395 Padstow 

 

Содержание TVS PRO
















Отзывы: