POOL+ MANAGER A2
APP GUIDE
GETTING
SET UP
Before downloading the App for the POOL+ MANAGER controller, please ensure that
the controller has been turned on, the WIFI indicator is slowly flashing, and the setup
phone
is connected to the 2.4 G home WiFi
(setup will not work using 5 G)
Download the POOL+ MANAGER App
Scan the QR code on the front of this page or rear of main controller
Add the home WiFi password in Device Setup
You are now ready to set up appliances
DEVICE:
there are several options that may be utilised.
QR Code
: Scan or Share:
Scan
– You can use this option to scan the QR code for the controller if your
phone doesn’t ask for the QR code to be scanned at initial startup of the App.
Share
– A simple way to add users that have downloaded the App.
WiFi Connection
: Setup – Enter Network Password
Installer Menu
: Lock Access to the Installer Menu:
The Installer Menu can be locked once the system is set up to prevent
equipment settings accidently being altered by users who may not know how
the system works or needs to be set up. Doing this will only enable people with
the password to have access to the Installer Menu options. Once locked, the
Installer Menu options won’t be visible in the menu screen.
When you have locked the Installer Menu you will be asked to enter the
password to unlock the Installer Menu options. Once unlocked the Installer
Menu options will be visible to allow alteration.
Device Information
: You can type the device name here and see all relevant
connection information and available UPDATES.
ADDITIONAL
INFORMATION
When completed the App will display all settings currently set in your controller.
From here you can select or alter any of the settings that are currently active in your
Master Controller.
