Themis TGA-7000 PMC, Руководство по установке

Страница: 22 / 38

3-2
Themis Computer
TGA-7000 PMC Graphics Card Installation Guide
2. Modify the file by adding the device locations for the applicable frame buffers
being used. See the following examples:
Enter the
Xservers
file content in one long line.
The following example shows the
Xservers
configuration file modified
for one Themis TGA3D+ Graphics Board (
ifb0
) and one TGA-7000 PMC
Graphics Card (
pfb0
):
:0 Local local_uid@console root
/usr/openwin/bin/Xsun -dev /dev/fbs/ifb0
-dev /dev/fbs/pfb0
The following example shows how to remove two Themis TGA3D+ Graph-
ics Boards and add one TGA-7000 graphics accelerator in the
Xservers
configuration file.
• Old
Xservers
configuration file with two TGA3D+ Graphics
Boards:
:0 Local local_uid@console root
/usr/openwin/bin/Xsun -dev /dev/fbs/ifb0
defdepth 24 -dev /dev/fbs/ifb1 defdepth 24
• New
Xservers
configuration file with one TGA-7000 graphics
accelerator:
:0 Local local_uid@console root
/usr/openwin/bin/Xsun -dev /dev/fbs/pfb0
3. Log out, then log back in.
If you are editing the
Xservers
file after completing installation, reboot
your system.