Themis TGA-7000 PMC, Руководство по установке

Страница: 19 / 38

Hardware and Software Installation
TGA-7000 Default Console Display
2-7
Themis Computer
2.4 TGA-7000 Default Console Display
To set the TGA-7000 graphics accelerator as the default monitor console display:
1. At the
ok
prompt, type:
ok show-displays
The following shows how to set the console device:
a) /pci@1f,700000/SUNW,XVR-100@3
b) /pci@1e,600000/SUNW,XVR-100@5
q) NO SELECTION
2. Select the graphics accelerator you want to be the default console display.
In this example, you would select
b
for the TGA-7000 graphics accelerator.
Enter Selection, q to quit: b
/pci@1e,600000/SUNW,XVR-100@5 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y for creating devalias mydev for
/pci@1e,600000/SUNW,XVR-100@5
3. Create an alias name for the TGA-7000 graphics accelerator device.
This example shows
mydev
as the alias device name.
ok nvalias mydev
Press Control-Y, then Return.
4. Set the device you selected to be the console device.
ok setenv output-device mydev
5. Store the alias name that you have created.
ok setenv use-nvramrc? true
6. Reset the output-device environment:
ok reset-all
7. Connect your monitor cable to the TGA-7000 graphics accelerator on your
system back panel.
Note: Only the TGA-7000 graphics accelerator HD15 video output connector
can provide console output. You cannot set the DVI video connector as the con-
sole.