Themis RES - 32XR3 Скачать руководство пользователя страница 55

Страница: 55 / 142

2-9

Themis Computer

Installation and Operation

Installation Procedures

Locate the empty slot within which a card will be installed and lift out the slot
cover (see

Figure 2-5

Install the new card, making sure the I/O panel is aligned with the chassis
opening.

Repeat Step 3 and Step 4 until all additional cards have been installed.

Swing the PCI card clamp back to its position over the PCI card I/O panels
and tighten the captive knurled screw on the PCI card clamp.

Attach any internal I/O cables to the installed PCI cards, and carefully fold
and tuck any exposed ribbon cables into the cabinet.

If you have no further installations to perform, close the RES-21XR3 chassis
by refastening the top cover removed in Section 2.1.1, “Remove Protective
Top Cover,” on page 2-1.

2.1.4

Lithium Battery

2.1.4.1 Removing the Lithium Battery

Perform the following steps to remove the lithium battery:

Make sure the system is powered off (see “Operation” on page 2-18).

Содержание RES - 32XR3















































































































































Результаты поиска

Содержание RES - 32XR3

Отзывы:

Похожие инструкции для RES - 32XR3

Бренды по названию

Популярные бренды

Themis RES - 32XR3, Руководство по установке

Результаты поиска

Содержание RES - 32XR3

Отзывы:

Похожие инструкции для RES - 32XR3

Бренды по названию

Популярные бренды