Themis RES-32XR3-S Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 146

background image

Copyright © 2010 Themis Computer, Inc.

ALL RIGHTS RESERVED.

No part of this publication may be reproduced in any form, by

photocopy, microfilm, retrieval system, or by any other means now known or hereafter invented without
the prior written permission of Themis Computer.

The information in this publication has been carefully checked and is believed to be accurate. However,
Themis Computer assumes no responsibility for inaccuracies. Themis Computer retains the right to
make changes to this publication at any time without prior notice. Themis Computer does not assume
any liability arising from the application or use of this publication or the product(s) described herein.

RESTRICTED RIGHTS LEGEND:

Use, duplication, or disclosure by the United States Government

is subject to the restrictions set forth in DFARS 252.227-7013 (c)(1)(ii) and FAR 52.227-19.

TRADEMARKS and SERVICEMARKS

Themis

®

is a registered trademark of Themis Computer, Inc.

Intel

®

and Xeon

®

are registered trademarks of Intel Corporation

.

Red Hat

®

is a registered trademark of Red Hat, Inc.

Linux

®

is a registered trademark of Linus Torvalds.

All other trademarks, servicemarks, or registered trademarks used in this publication are the property of
their respective owners.

CE Marking

This product complies with the European EMC Directive (2004/108/EC) and the European Low Voltage
Safety Directive (2006/95/EC)/.

Safety Precautions

Instructions regarding safety precautions during installation, operation, or maintenance of the equipment
are given in the section entitled “Safety Instructions” on page iv.

WARNINGS and CAUTIONS

The definitions of WARNINGS and CAUTIONS as used in this document are given in the Preface in
the section entitled “Notes, Cautions, Warnings, and Sidebars”.

RES-32XR3-S for X8DTL-6/6F Installation Manual, Version 1.0

September 2010

Part Number: 117408-024

Themis Customer Support

North America, South America, and Pacific Rim

Telephone: 510-252-0870

Fax: 510-490-5529

E-mail: [email protected]

Web Site:

http://www.themis.com

«
...
2
3
4
5
6
...
»

Содержание RES-32XR3-S



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для RES-32XR3-S

ABLELink SE5002 Series

Бренд: ABLELink Страницы: 4

Бренд: IBM Страницы: 88

x3800 - System - 8865

Бренд: IBM Страницы: 104

digitalSTROM-Server

Бренд: aizo Страницы: 2

Бренд: IBM Страницы: 74

ApplianceStor 15MT

Бренд: Rasilient Страницы: 30

SUPERO SuperServer 6026TT-H6IBQRF

Бренд: Supero Страницы: 110

Бренд: Digital Equipment Страницы: 15

Бренд: Rohde & Schwarz Страницы: 126

PRICOM PRICOM C- 5100

Бренд: Silex technology Страницы: 7

Бренд: Brocade Communications Systems Страницы: 176

TVS- 72XU Series

Бренд: QNAP Страницы: 56

Бренд: King Pigeon Страницы: 19

Бренд: Asus Страницы: 82

Бренд: Asus Страницы: 32

Бренд: Asus Страницы: 42

RS100-E5 - 0 MB RAM

Бренд: Asus Страницы: 148

PIKE II 3008 Series

Бренд: Asus Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды