Themis RES-32XEL, Руководство по установке

Страница: 37 / 52

2-13
Themis Computer
Installation and Operation
Installation Procedures
2.1.8 Lithium Battery
2.1.8.1 Removal
1. Make sure the system is powered off (see “Operation” on page 2-16).
2. Locate the lithium battery socket (see Figure 1-4 on page 1-5) and squeeze the
battery latch (see Figure 2-10 ) together until the battery lifts out of its socket.
3. Remove the old battery and replace with a new battery (see next section).
2.1.8.2 Installation
4. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
A , Figure 2-10 ).
5. Carefully press down on the battery until it clicks firmly into place.
Figure 2-10.
The RES-32XEL Lithium Battery and Socket
To release, squeeze battery latch together . . .
Battery
A B
Latch
. . . and remove battery from socket