Themis RES-32XEL, Руководство по установке

Страница: 40 / 52

RES-32XEL Installation Guide
2-16
Themis Computer
2.3 Operation
2.3.1 Turning the System On
1. On the rear of the RES-32XEL chassis, plug an AC power cord (shipped with
unit) into the AC power socket on each power supply (see
Figure 2-13 ).
2. The LED on each power supply will turn on when AC power is enabled.
3. On the left front of the RES-32XEL, push the system power on/off switch (see
Figure 2-14 ) briefly. This will cause the
POWER
LED to light (green).
Figure 2-13.
AC Power Socket and LED on the RES-32XEL Rear
Figure 2-14.
System Power Switch and LED on the RES-32XEL Front
AC Power Socket
LED
System Power
On/Off Switch
Power LED