5
• Unscrew the side on door entry access points on the base
plate of the PIR and open it. Locate the terminal connections
and terminate the cables into the terminal block ensuring
that the correct polarity is observed and that all bare
conductors are sleeved. (See Section 6. Connection Diagram)
• When wiring is complete, close the door entry access points
to clamp the cable securely into place. Tighten the screws
to the door entry points and ensure not to over tighten.
Door entry point for
terminal access
Swing motion
door entry
Cable clamp built into the
door entry access point
• Fit the PIR into the hole cut out previously cut until the springs
flcik out and secure the body to the ceiling.
ø68mm
