Theben theLuxa S360 WH, Руководство пользователя

Страница: 3 / 4

3
0
2
Sec
2 sec
Test
Min
Align motion detector with sensor head
The sensor head can be turned by 45° downwards and 90°
upwards and by 90 ° to the left and right.
90°
45°
90°
90°
6. Use screens
† †
Use supplied screen to adjust the motion detector to
desired detection area.
† †
Remove the required section from the screen using pliers.
† †
Then place on the lens and screw in.
7. Setting
The motion detector has 3 potentiometers underneath
for setting the time (Min), brightness (Lux) and sensitivity
(Meter).
Meter Min
Lux
Set brightness (lux)
You can set different brightness values (lux) with the
potentiometer.
If you want to change the preset brightness (15 lux default)
† †
Set potentiometer to desired brightness (5 – 1000 lux).
teach-in 1000 Lux
5 Lux 500 Lux
7 Lux 100 Lux
10 Lux
15 Lux
50 Lux
15 Lux
or want a specific brightness value to be learned using the
teach-in function
† †
At the desired brightness set the potentiometer to .
The value will be learned after 15 s.
† †
Leave potentiometer at position .
Set time (min)
If the motion detector detects no further movement, it swit-
ches off after the set time.
If you want to change the preset time (2 min default)
† †
Set potentiometer to desired time (1 s – 20 min).
Min
test 20 min
1 s 15 min
30 s 10 min
1 min
2 min
5 min
2 min
If you want to use the pulse function (e.g. for a staircase light
time switch)
† †
Set potentiometer to position
Min
. The motion detector
is switched on for < 1 s, then off for 9 s. If it detects a
movement again, it switches on again for 1 s.
Set sensitivity (Meter)
You can reduce the sensitivity; this also reduces the detection
range.
† †
Set Potentiometer Meter to the desired sensitivity.
Meter
Max. sensitivity