11
Leave potentiometer at position
.
Set time (min)
If the motion detector detects no further movement, it swit-
ches off after the set time.
If you want to change the preset time (2 min default)
Set potentiometer to desired time (0.5 s – 20 min).
Min
test
20 min
1 s
15 min
30 s
10 min
1 min
2 min
5 min
2 min
If you want to use the pulse function (e.g. for a staircase light
time switch)
Set potentiometer to position
Min
. The motion detector
is switched on for < 1 s, then off for 9 s. If it detects a
movement again, it switches on again for 1 s.
7. Caractéristiques techniques
•
Operating voltage:
230 V AC, +10 % –15 %
•
Frequency:
50 Hz
•
Standby:
< 1 W
•
Detection angle:
150°/180°
